10 Best Digital Temperature Controller | Choose Best One For You

Are you looking for Best Digital Temperature Controller ? Our Experts made a top 10 list for you. Take a look –

We found thousand of reviews when researching. We have considered users feedback on the Best Best Digital Temperature Controller and Our suggestion includes only the finest of them in this articles.

10 Best Digital Temperature Controller

Top pick. 1
Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W
  • 🥇🥇【Easy to use】 Supports °C/°F display.
  • 🥇🥇【Dual relay】able to power refrigeration and heating equipment as conditions change.
  • 🥇🥇【Dual Display Window】Displays measured temperature and set temperature at the same time.
  • 🥇🥇【Buzzer Alarm】High and low temperature alarms are available when the temperature is over or the sensor experiences a malfunction.
  • 🥇🥇【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.
Top pick. 2
HiLetgo 2pcs W1209 with Case 12V DC Digital Temperature Controller Board Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with 10A One-Channel Relay and Waterproof
  • 100% complete machine patch, wave soldering, stable performance, good consistency.
  • Embedded CPU chip (MCU), more intelligent, lower power consumption.
  • Automatic power set memory (MCU built-in EEPROM memory unit).
  • Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability.
  • Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
SaleTop pick. 3
Inkbird All-Purpose Digital Temperature Controller Fahrenheit and Centigrade Thermostat with Sensor 2 Relays ITC-1000F for Refrigerator Fermenter
  • 🌟🌟【Two Modes】Have two relays. Switch between cooling and heating modes. Support °F/°C display.
  • 🌟🌟【Setting Value】Control the temperature by setting the temperature set value and the difference value.
  • 🌟🌟【Different Functions】Refrigerating control output delay protection, and temperature calibrating.
  • 🌟🌟【Alarm for Safe】 Alarm when temperature exceeds the limit or when sensor error.
  • 🌟🌟【Power Supply】 110VAC 50Hz/60Hz
Top pick. 4
Pymeter 2 in 1 Digital Temperature Controller Dual Outlet Heat Mat Thermostat Reptile Greenhouse Heater Home Brewing Freezer Cooling Heating Pad Control 16A 1920W
  • 🏆🏆【Excellent Value for Money】Dual Probes, Dual Outlets, Dual Zones Control, it's a Dual Controllers in ONE Unit. More than DOUBLE the functionality of other thermostats!
  • 🍺🍺【Incredibly Easy Setup】Just need to set outlet 1 turn ON at A temp point, turn OFF at B temp point, and set outlet 2 turn ON at C temp point, turn OFF at D temp point, then outlet 1 will control temp in the range of A~B, and outlet 2 will control temp in the range of C~D.
  • 🔥💦【Flexible Heating/Cooling】Heating+Coloing, Heating+Heating, Cooling+Heating, Cooling+Cooling, any combination as you want.
  • 🎯🎯【Fairly Accurate】Accurate to 0.1°F both in setting and reading, Control Accuracy can be set within 1°F, e.g. control temp in the range of 85.5°F~85.9°F.
  • 🐠🐠【Safe and Reliable】Support High and Low Temperature Alarm; Temperature Difference Alarm, which is very helpful to keep target safe from malfunction of any one sensor. Cooking fishes NEVER happen!
Top pick. 5
WILLHI WH1436A 10A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version
  • WE'VE IMPROVED THE TEMP CONTROLLER: This is NOT a humidity controller! Simplified operation, larger power, wider control range, standard U.S. outlet, enhanced waterproof sensor probe. Get the new version right now. NO WIFI connection!
  • HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the settings and device you plug into the controller. NO wifi connection!
  • MAX LOAD: Rated for 10A,1100W at 110V. Outlet not compatible with 2 hot lines 220V plug (Celsius or Fahrenheit Read-out).
  • PLUG AND PLAY: Insert the probe and then set ON & OFF temp. This temperature regulator will turn your device on/off as programmed to keep temperature between the desired range. Comes with a 3m(9.8ft) probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C).
  • WIDE APPLICATIONS: Our thermostat outlet is widly used for seedling germination, home brewing, fermertation, rooting, sous vide, incubation, pet breeding, aquarium, heaters or cooling devices such as heat mat/lamp, refrigerator/frezzer....
Top pick. 6
Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse
  • 【Output】2 Relays, control the temperature by setting the temperature set value and the difference value.
  • 【Mode】Automatic switch between cooling and heating modes, Fahrenheit and Celsius display can be choose.
  • 【Calibration】Temperature calibrating, refrigerating control output delay protection.
  • 【Alarm】When temperature exceeds the limit or when sensor error it will alarm. It can be used for peltier water cooling device, cooling fan, car's 12v battery, 12 volt chest cooler,heater etc.
  • 【Warranty】12V temperature controller with 1 years warranty.
Top pick. 7
BN-LINK Digital Cooling Thermostat Controller for Cooling Device Circulation Box Fans 40-108F 8.3A 1000W
  • ✓ EFFORTLESS COOLING SETUP: Simply place the probe, plug-in the thermostat controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.
  • ✓ EASE OF MIND: Handy LED cooling and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.
  • ✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6-feet in length, designed to suit almost any application you can imagine.
  • ✓ VARIETY OF USES: Our thermostat controller can be used for refrigeration, fermentation, greenhouse fan and more, keeping your various environments in their ideal temperature range.
  • ✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
Top pick. 8
bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
  • Simplified Design---Easy to set. Support °F display
  • One Relay Output---Switch between heating mode and refrigeration mode according to the device you plug into the controller. Maximum output load: 1100W(110V)
  • Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration
  • Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -4 ~ 230°F
SaleTop pick. 9
Zilla Digital Temperature Controller
  • Controls up to 1000W
  • 3 power outlets
  • Helps maintain consistent temperatures
  • For use with: Ceramic Heat Emitters, Heat Mats, Heat Tape, and other heating elements
  • ETL Tested and Approved
SaleTop pick. 10
Inkbird ITC-308 Digital Temperature Controller Outlet Thermostat 2-Stage 1100W with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding Growing
  • [Convenient Design] Plug and play design, easy to use.
  • [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
  • [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
  • [Dual Reading Mode] Support reading with Centigrade or Fahrenheit unit.
  • [Parameter] .Maximum output load: 1100W(110V).

Leave a Comment

Your email address will not be published.

Scroll to Top